This has the potential to reduce the manpower requirement for Pipe installations as well as significantly reducing the time involved in manually supporting the lengths of pipe. With its self-closing/self-holding feature, the CJ Clamps are easy and quick to install. This feature allows a pipe to be placed into the pivoting bracket of the clamp, which in turn moves to a closed position and benefits from the weight of the pipe acting on the arm to keep it closed until fully secured in position (see Figure1). Made from marine grade 304 Stainless Steel or galvanized Mild Steel, this product has very high strength characteristics, as well as a high level of corrosion resistance, which make them suitable for inside and outside use. Due to its clever design it provides additional benefits of being a seismic rated pipe clamp. (Comes in a range of sizes, suitable for 20, 25, 32, 40, 50, 65, 80, 100, 150 & 200 NB size pipe) NB: Internal diameter of the clamp can be cut to suit any tube/pipe diameter and shape (on request). The Pipe Clamp is a self-closing clamp that has particular application to the clamping and securing of nominal sized pipe systems to be suspended from overhead structures such as ceilings or beams. With its self-closing/self-holding feature, the Pipe Clamp is easy and quick to install. This feature allows a pipe to be placed into the pivoting bracket of the clamp, which in turn moves to a closed position and benefits from the weight of the pipe acting on the arm to keep it closed until fully secured in position. The two folded tabs on top of the swinging bracket set and secure the clamp, by the inclined tabs forcing the swinging bracket into its closed position when tightening the top flanged nut. The 304 Stainless Steel and Galvanized Mild Steel versions of the Pipe clamp have been rated to support between 9 and 13 times the static load required by the Specification No: NZS 4541:2013 (section 403.9) for pipework supporting brackets. #Brackets to secure pipes install#Īdjustabilityĭue to its clever design and threaded rod connection features, the Pipe clamp is very easy to install and adjust to the desired position before and after the pipe is installed. Possibility to use with many seismic bracing options. Every Pipe clamp has a secondary attachment point, which allows for an additional hanger or connection to be secured for seismic bracing (see our CJ Seismic bracing section below for more detail). Made from 304 grade Stainless Steel or galvanized Mild Steel, the Pipe clamp has very high corrosion resistance characteristics. NB: Internal diameter of the clamp can be cut to suit any tube/pipe diameter and shape (on request). The Surface clamp is a self-closing clamp that has particular application to the clamping and securing of nominal sized pipe systems to be mounted flush beneath a purlin flange. With its self-closing/self-holding feature, the Surface Clamps are easy and quick to install. This feature allows a pipe to be placed into the pivoting bracket of the clamp, which in turn moves to a closed position and benefits from the weight of the pipe acting on the arm to keep it closed until fully secured in position. Made of 304 Stainless Steel or galvanized Mild Steel, the Surface clamp has very high strength and corrosion resistance characteristics. The profile designed into the narrow section between the two attachment points of the Surface Clamp allow it to be bent to the desired angle, in order to be used on inclined purlins. The CJ Seismic Bracing range comprises two options:ġ.
0 Comments
Leave a Reply. |